I believe that everyone often does not know how to install the table legs. A slightly improper installation will cause damage to the table, turning the original purchase of a beautiful piece of epoxy table into a troublesome process. So today, we will tell you the details of the installation of KAZANA table legs, so please continue reading.
There are two main ways to install our table legs. One is to drill holes and use screws, and the other is to use cotton pads to stick directly without drilling holes.
INSTALLATION WITH SREWS
If you'd like to install the table legs with screws that require drilling, please follow the steps below.
Test position: First turn the table upside down and lay it flat (no drilling is required for this step), then adjust the table legs to find the most stable position.
Drilling: Please drill according to 3/10 inch of the thickness of the table. Remember not to drill too deep, otherwise it is easy to damage the resin and cause cracking
(Note: Our screws are sent randomly. If the screws you receive are longer than 0.98", you should pay special attention when installing the screws. Although screws that are too long can ensure the stability of the table to a greater extent, they will easily cause the table top to crack and cause trouble if they are not installed properly.)
INSTALLATION WITH COTTON PADS
If you'd like to install the table leg with a cotton pad, please follow the steps below to install it.
A: For solid wood table legs, simply attach the provided table leg padding, adjust the spacing between the legs, and place the table securely on top.
B: For the metal table legs, simply install the provided leg pads, adjust the spacing between the legs, and then securely place the table on top.
Test Position: First turn the table upside down and lay it flat (do not use the shims for this step) and adjust the legs to find the most stable position.
Securing with Shims: Once you have determined the ideal position, use the provided adhesive pads to secure the legs to the bottom of the table. These shims are designed to be securely fastened without drilling.
Because drilling will cause a certain risk of damage, we recommend that you use cotton pads for installation. Our cotton pads are strong cotton pads, and heavy objects can ensure their stability without drilling, thus avoiding the risk of damage.
I hope this can bring some inspiration to your table leg installation. If you have any other questions, please contact us.
